A new x-ray framing camera with picoseconds time resolution

A new method to get a X-ray framing camera with picoseconds time resolution was proposed based on time amplification. Its principle comes from that we use high voltage electrical pulse to get speed dispersion of the photoelectrons pulse first, and then the photoelectrons pulse will be stretched in axial direction by drift area, at the end the photoelectrons pulse after stretched will be framing imaged by a traditional MCP（microchannel plate）gated framing camera. A model of the camera was built according to this method. Time amplification of the system is about 30, and image magnification of the system is about 0.4. Parameters for designing the camera system were presented after theoretical deriving and model simulation. At last, theoretical time resolution and spatial resolution of the camera were given.