Measurements of radial profile of isotope density ratio using bulk charge exchange spectroscopy.

A bulk charge exchange spectroscopy (BCXS) system using a grism (grating prism) spectrometer has been applied to measure the profile of the deuterium (D) fraction in deuterium and hydrogen (H) mixture plasma in the Large Helical Device. The observed spectrum can be fitted with four Gaussian functions successfully by reduction of free parameters for the least-squares fit. The plasma flow velocity and ion temperature profile measured by charge exchange spectroscopy using carbon impurity are used for estimation of the wavelength shift of hot components to reduce the free parameter. The ion temperature is used to estimate the apparent wavelength shift due to the energy dependent emission cross section only and is not used to set the Doppler width for H and D in the fitting. The sensitivity of the evaluated D fraction on the velocity is increased for a higher D fraction. The error of the D fraction is calculated from the error in the fitted parameter and sensitivity on the velocity of the hot component. The difference in the profile and time trace of the D fraction with D pellet and H pellet injection was observed clearly by BCXS using a grism spectrometer.