Non-Invasive Monitoring of the Technical Condition of Power Units Using the FAM-C and FDM-A Electrical Methods

This article presents the selected results of analytical and structural work conducted at the Air Force Institute of Technology (pl. ITWL) in the field of building a measuring apparatus for non-invasive monitoring of the technical condition of aircraft power units. Presented innovative FAM-C and FDM-A methods allow for observation of frequency modulation parameters as well as identification and diagnostic classification of particular mechanical subassemblies supplying the on-board generator and thus enable non-invasive monitoring of technical condition of the aircraft power unit and the aircraft propulsion system. The main purpose of this article is to present the measurement apparatus errors that occur in the signal conditioning system in the FAM-C and FDM-A methods. In spite of the fact that the measuring instrument was built on the basis of digital technology and that it uses typical solutions of electronic frequency measurement, due to the specificity of the applied diagnostic method there occur specific measuring errors which are presented in this article.