Research and Application of Micromotional Exploration in the Middle-Lower Yangtze Metallogenic Belt of China

Micromotion is the daily tiny vibration of the earth’s surface. Micromotional exploration can use the surface wave information of micro motion to study the shallow structure of underground media. In this study, we collected microtremor data at 68 stations in the Middle-Lower Yangtze Metallogenic Belt (MLYMB) and determined the resonant frequency and obtained the distribution of sedimentary thickness in this area by using H/V spectral ratio. According to the results of H/V, the sedimentary layer in the basin is thick, and the predominant frequency of the basin is 0.05 - 0.1 Hz. There are no obvious lateral changes in the impedance interface between bedrock and sedimentary layer in this area. The basement of Tongling, Anqing and Luzhou mining areas and their adjacent areas is Kongling-Dongling type basement, which is composed of a set of metamorphic core complex. The predominant frequency is 0.05 - 0.1 Hz. The sedimentary thickness gradually thinned from 3800 m in the west to 2100 m in the East. Moreover, this article used SPAC (spatial autocorrelation) method to obtain the S-wave velocity structure of the mining area near Luzong. The SPAC method reveals that the depth of the interface between the loose sediments and the volcanic rocks is about 600 m in the study area near the Luzhou mining area in the Middle-Lower Yangtze Metallogenic Belt, and the average depth of the interface between the volcanic rock section and the intrusive complex section is about 1000 m. The thickness of the intrusive rock is more than 2500 m. Tourmaline is developed in the interior of the intrusive rock, which may have better exploration value.