Joining of silicon nitride with a Cu76.5Pd8.5Ti15 filler alloy

Abstract Si 3 N 4 ceramic has been joined successfully to itself by brazing in a vacuum at 1373–1573 K holding for 1.8 ks using a Cu76.5Pd8.5Ti15 alloy filler. By observation and analysis of the microstructure of the joints, it is found that the joints comprise three parts: (1) a continuous reaction layer of TiN between Si 3 N 4 and filler alloy, (2) a discontinuous reaction layer containing TiN, Pd 2 Si and Ti 5 Si 3 connecting the continuous reaction layer, and (3) the Cu-based solid solution in the mid of the joint and some reaction products (TiN, Pd 2 Si, PdTiSi and Ti 5 Si 3 ) in the solution. With increasing brazing temperature, both the thickness of the continuous reaction layer and amount of reaction phases increase, which improves the bending strength of the joints. When the brazing temperature surpasses 1473 K, voids are formed in the joint because of the decomposition of the Si 3 N 4 ceramic, leading to a decrease of the bond strength. The room-temperature bending strength of the joint brazed at 1423 K reaches a maximum value of 155.8 MPa.