Effect of post-weld solution treatment on microstructure and mechanical properties of electron beam welded IN738LC joint

Abstract The effect of post-weld solution treatment (PWST) on microstructure and mechanical properties of electron beam welded IN738LC joint has been investigated. The fusion zone (FZ) of IN738LC joint consisted of γ-Ni matrix, fine γʹ particles, granular MC carbides and a bit of M23C6 carbides after PWST. With the increased solution temperature, the area percent of MC carbides decreased while the content of γʹ particles increased gradually. The solvus temperature of γʹ phase in FZ and base metal (BM) was 1150oC and 1175oC, respectively, which was due to the different size of primary γʹ particles. When the complete dissolution of primary γʹ particles in FZ and BM occurred, the micro-hardness of FZ and BM reached the peak values (509.5HV and 503.9HV). As the solution temperature increased, the tensile strength of IN738LC joint initially increased and then decreased, while the stress-rupture life of IN738LC joint decreased steadily. The joint with bimodal-size γ′ particles and moderate MC carbides after 1125oC/2h heat treatment showed the excellent comprehensive mechanical performance, and the average strength and stress-rupture life of IN738LC joints were 686MPa (900oC) and 2.395h (900oC/350MPa), respectively. Consequently, 1125°C/2h has been proposed as an optimized PWST process for IN738LC joint.