Diagnosing and monitoring pleural effusion using parametric electrical impedance tomography - a computational 3D model and preliminary experimental results

Abstract Purpose Diagnosing and monitoring pleural effusion (PE) is challenging due unsuitability of existing modalities. In the present study, a novel parametric electrical impedance tomography (pEIT) technique, tailored to a clinically feasible system to diagnose PE is presented. Methods An electrical impedance tomography (EIT) numeric solver was applied to a 3D realistic normal model and five PE models to simulate sets of surface measurements. Simulations were triggered by a series of eight independent projections using five electrodes positioned around the thorax. The relative changes in the potential between the PE models and the normal model were assessed and the error in the estimated PE volume was examined at varying signal to noise ratio (SNR) levels. For experimental feasibility, measurements were performed in four healthy subjects and were correlated with the potentials that were calculated from the normal model. Results Relative potential changes were notable (reached until ∼55%) and increased with the increasing PE volumes. Maximal error of ± 20 [mL] was obtained for SNR levels >50 [dB]. The feasibility real measurements in healthy subjects showed a strong linear correlation (R2 > 0.85) and a successful diagnosis for all subjects. Conclusion The proposed technique can estimate PE volumes from a redundant set of measurements in a realistic 3D human model and may be utilized for monitoring PE patients.