Investigating the impact of collimator size variation on the single beam radiation of Gamma Knife PerfexionTM based on Monte Carlo simulation

The Gamma Knife PerfexionTM (Elekta Oncology Systems) is a specialized stereotactic radiotherapy device that uses 192 Cobalt-60 radioactive sources. A dynamic collimator system enables three circular field sizes of 4 mm, 8 mm, and 16 mm diameter to be delivered. This study investigates the dosimetric characteristics of the three different sized collimated beams using Monte Carlo (MC) simulations. The MC simulation made use of previously calculated phase space from a Monte-Carlo model of the encapsulated Cobalt-60 sources. The collimators were modelled using the FLATFILT component module of the BEAMnrc user code. The output of the single beam radiation was stored in a circular scoring plane with a radius of 1.4 cm at source surface distance (SSD) 17.20 cm in the phase space file. The simulation parameters were used 2.1 x 109 particles, electron cut off energy (ECUT) of 0.7 MeV, and photon cut off energy (PCUT) of 0.01 MeV. To investigate the physical full width at half maximum (FWHM) and penumbra width (80-20%), the single beam profiles and mean energy were obtained using BEAMnrc/BEAMDP code. Based on the results that there was an increase of the full width at half maximum (FWHM) with the size of the collimator on the beam profile and the mean energy. The FHWM of the energy fluence profile for the collimator 4, 8, and 16 mm are 2.22, 3.90, and 7.80 mm, respectively. The FHWM of the fluence profile for the collimator sizes 4, 8, and 16 mm are 1.87, 3.87, and 7.80 mm. The FHWM of mean energy as a function of position for the collimator sizes 4, 8, and 16 mm are 2.56, 4.20, and 7.94 mm, respectively. The maximum mean energy for the collimators decreases as much as 0.0185 MeV.