Determination of silicon carbide fiber electrical resistivity at elevated temperature
2017
: The resistance of Sylramic-iBN and Hi-Nicalon SiC fiber tows was measured at elevated temperature in air. Resistivity could not be directly measured, since the fibers passed through a furnace with varying temperature along the length. The resistivity of the isothermal section of the fiber tow was modeled by a series circuit of finite elements. Existing data for Hi-Nicalon resistivity vs temperature was used to verify the model and then extend it to Sylramic-iBN, for which there is no literature data readily available. The model matched experimental values with low overall error (<±14%). Fiber resistivity decreased by more than two orders of magnitude when heating from 25°C to 1400°C. Sylramic-iBN tow resistance was also measured during a 500 hour hold at 1315°C. The resistance increased by more than 140% during heat treatment. The resistance change correlated well with the decrease in SiC fiber diameter that resulted from oxidation.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
13
References
0
Citations
NaN
KQI