A Transmission Metasurface for Generating OAM Beams

This letter presents a novel transmission metasurface to achieve orbital angular momentum (OAM) waves at the X -band. The unit cell of the proposed metasurface consists of three dielectric layers and four metallic layers, where the metallic layer is composed of an outer metallic ring and a center quasi-snow patch. A good transmission coefficient of the unit cell is obtained at the operating frequency. Meanwhile, a full 360° phase shift can be achieved by changing the length of the quasi-snow patch. The method of generating OAM waves is studied and analyzed. Based on this method, a metasurface producing a +1-mode OAM wave is designed and simulated. To verify this concept, one prototype is fabricated, assembled, and measured. The measured results agree well with the simulated ones, showing that the +1-mode OAM wave can be generated successfully with a high gain of 14.5 dBi. Moreover, a narrow divergence angle of +/−9° is achieved in the produced OAM wave.