Preparation and characterization of different geometrical shapes of multi-bore hollow fiber membranes and application in vacuum membrane distillation

Multi-bore hollow fiber membranes were prepared through phase inversion spinning process using new locally designed spinnerets of various geometrical shapes. The spun cylindrical-like, rectangular or ribbon-like, and triangular-like are prepared, dried, and characterized by scanning electronic microscope. Fibers of circular (seven, five, and four bores) shape, rectangular of five bores, and triangular of three bores were chosen to study the effect of both geometrical configuration and the number of bores on the amorphous structure and the mechanical properties of the membranes. Membrane geometry, surface amorphous, and bore arrangements are very sensitive to the operating conditions, especially the extrusion and drawing rates. Three polymeric blends of different compositions are used to prepare multi-bore hollow fiber membranes. This study revealed that the blend composition of PES 16%, PVP 2%, PEG 2%, diethylene glycol 2%, and NMP 78% gives excellent mechanical properties. Optimization of the preparation conditions also developed, where the dope flow rate, the bore flow rate, and the air gap were 1.14 cm3 s−1, 1.1 cm3 s−1, and 0 cm, respectively. Furthermore, this study proved that the circular arrangement has high mechanical strength. The prepared seven-MBHF membranes were applied in the membrane distillation process, a solution of 35 g/l NaCl was used to test the membrane performance, and the achieved flux and rejection were 28.32 L/m2 h and 98.9%, respectively. This performance demonstrated that the prepared membrane in this way is suitable to compete with conventional reverse osmosis technology that uses single track hollow fibers.