Vitrification of a surrogate for high-level wastes from the Savannah River facility (USA) in a commercial cold-crucible facility

Experiments on vitrifying a surrogate for SB2 pulp from the Savannah River facility (USA) in a cold crucible with inner diameter 418 mm in a commercial facility for vitrifying medium-level wastes at the Moscow Scientific and Industrial Association Radon are performed. Borosilicate glass materials, containing 50 mass % oxides of the wastes, including a magnetitic spinel phase in amounts not exceeding 15 vol. %, are obtained. The maximum mass average velocity of the slurry load and the melt output reach 40 and 16 kg/h, respectively. This corresponds to maximum specific vitrified wastes production capacity 2830 kg/(m2·day). The specific energy consumption for obtaining the glass product is about 10 kW·h/kg, which is approximately half the level for reprocessing slurries in crucibles with half the diameter. The chemical stability of the glass materials is 10–50 times higher than that of the materials made from glasses recommended by the US Environmental Protection Agency.