Effect of thermal history on the structure and mechanical properties of a thermoplastic polyester elastomer

Abstract An appropriate processing protocol was proposed to improve the rubber elasticity of a thermoplastic polyester elastomer (TPEE). Rheology measurements at the processing temperature and thermal measurements determined the critical temperature at which small numbers of crystals exist. It was found from dynamic mechanical analyses, wide- and small-angle X-ray measurements, and electron microscope observations that cooling from the critical temperature markedly promoted the crystallization of hard segments. Moreover, tensile tests revealed that the modulus and yield stress increased. Most importantly, compared with films obtained by cooling from high temperatures, the residual strain at a fixed stress was low—i.e., the rubber elasticity was improved owing to its well-developed crystalline structure. These effects were accelerated by a more optimized process—i.e., subsequent heating at slightly below the critical temperature. The technique is noteworthy because a TPEE with high modulus generally shows poor elasticity.