Coherent beam combining of two single-frequency 200W fiber amplifiers for gravitational wave detectors
2021
Gravitational wave detectors require single-frequency laser sources with challenging requirements regarding beam quality and noise properties. We developed a reliable single-frequency fiber amplifier architecture based on standard step-index large-mode-area fibers and coherently combined two high power beams to enable further power scaling. A combined power of 391 W could be achieved with a combining efficiency of approx. 92 %. The TEM00-mode content of the combined beam was analyzed and a higher-order-mode content of 6.8 % was measured. This yields 365 W linearly polarized output power in the TEM00-mode that is usable for the application.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI