Formation of plasma working fluids for compression by liner implosions

Research on the formation of a hot hydrogen working fluid, which may be used in multiple concentric solid‐density liner implosions, is reported. In such implosions, an axisymmetric outer liner is driven by a multi‐megamp axial discharge, and a coaxial inner liner is driven by a working fluid contained between the liners. The fluid is shocklessly compressed to high pressure as the outer liner implodes around it. In the work reported here a 10 to 100 Torr pressure, hydrogen filled coaxial gun discharge was used to inject plasma into a diagnostic chamber simulating an interliner volume. Spectroscopically determined electron densities of between 1017 and 1018 cm−3 and electron temperatures in the 0.5–2.0 eV range were obtained with a fair degree of reproducibility and symmetry. Two‐dimensional, time‐dependent magnetohydrodyna‐ mic computer simulations of the working fluid formation experiment have been performed, and the computations suggest that the present experiment achieves electron number densities and t...