Modeling of photocatalytic mineralization of phthalic acid in TiO2 suspension using response surface methodology (RSM)

ABSTRACTThe optimization of operational parameters for enhanced phthalic acid photocatalytic mineralization by TiO2/UV system was conducted using factorial experimental design and analysis. Response surface methodology (RSM) was adopted to investigate the optimum value of the selected factors for achieving maximum photocatalytic mineralization. The main factors studied were the initial concentration of phthalic acid, TiO2 dosage, volume of the solution, and agitation speed. The parameters coded as X1, X2, X3, and X4, consecutively, and were investigated at two levels (−1 and + 1). The effects of individual variables and their interaction effects for dependent variables, namely, the quantity of CO2 formed after 60 min of irradiation were determined. Experimental results showed that TiO2 dosage had significant influence on the photocatalytic mineralization. The optimum quantity of CO2 formed after 60 min of irradiation was 0.08513 mmol, when the operational parameters were phthalic acid concentration of 1 m...