Effect of copper slurry on polishing characteristics

The composition of the polishing solution is optimized by investigating the impact of the WIWNU (the so-called within-wafer-non-uniformity WIWNU) and the removal rate(RR) on the polishing characteristics of copper.The oxidizer concentration is 1 Vol%;the abrasive concentration is 0.8 Vol%;the chelating agent of the solution is 2 Vol%.The working pressure is 1 kPa.The defect on the surface is degraded and the surface is clean after polishing.The removal rate is 289 nm/min and the WIWNU is 0.065.The surface roughness measured by AFM after CMP(chemical mechanical planarization) is 0.22 nm.