The reduction of CO2 / bicarbonate to ethanol driven by Bio-electrochemical system using reduced graphene oxide modified nickel foam

Abstract In this study, the reduced graphene oxide modified nickel foam (abbreviated as RGO-Ni) was used as catalytic cathode to reduce CO2 / bicarbonate to produce organics in catholyte (containing 0.45 M KHCO3), driven by bio-electrochemical system. The characterization of electrode materials were tested by Scanning Electron Microscope (SEM) and Cyclic Voltammetry curves (CV). The reduction products was analyzed by Gas Chromatograph - Mass Spectrometer (GC-MS). The power generation and the faradic efficiency of the reduction process was determined. The results indicated the RGO-Ni electrode showed much higher catalytic activity than Ni electrode or graphene oxide modified Ni electrode (GO-Ni). The results of GC-MS indicated the reduction products were ethanol (as primary product) and acetone (as by product). Over the RGO-Ni cathode, after 6 h reaction in catholyte with CO2 continuously aerated, the final concentration of Chemical Oxygen Demand (COD) was 389 mg L-1, and the concentration of ethanol was 167 mg L-1. The process maximum power density was 0.52 W m-2 over RGO-Ni electrode, almost 17 times of the value (0.03 W m-2) using Ni cathode. The faradaic efficiency of the process was calculated as 70%, and the reduction mechanism of CO2 / bicarbonate was suggested.