Multi-material direct ink writing of photocurable elastomeric foams

2021 
Developments in additive manufacturing have enabled the fabrication of soft machines that can safely interface with humans, creating new applications in soft robotics, wearable technologies, and haptics. However, designing custom inks for the 3D printing of soft materials with Young’s modulus less than 100 kPa remains a challenge due to highly coupled structure-property-process relationship in polymers. Here, we show a three-stage material chemistry process based on interpenetrating silicone double networks and ammonium bicarbonate particles that decouples the transient behavior during processing from the final properties of the material. Evaporation of ammonium bicarbonate particles at the final stage creates gaseous voids to produce foams with a low effective Young’s modulus in the 25 kPa −90 kPa range. Our photoirradiation-assisted direct ink writing system demonstrates the ability to maintain high resolution while enabling controlled loading of ammonium bicarbonate particles. The resultant multi-material possesses programmed porosity and related properties such as density, stiffness, Shore hardness, and ultimate strength in a monolithic object. Our multi-hardness synthetic hand and self-righting buoyant structure highlight these capabilities. There is an ongoing need to lower the Young’s modulus of polymer components produced by 3D printing. Here, a three-stage printing process creates multi-material components with Young’s moduli of 25 kPa – 90 kPa, enabled by the evaporation of ammonium bicarbonate to create gaseous pores.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    61
    References
    0
    Citations
    NaN
    KQI
    []