Selective laser melting of magnesium AZ31B alloy powder

This paper aims to discuss the results of material tests conducted on specimens manufactured from AZ31 alloy powder by selective laser melting (SLM) technology. The manufactured specimens were then subjected to porosity assessment, microstructure analysis as well as to mechanical and corrosion tests.,SLM process was optimized using the design of experiments tools. Experiments aimed at selecting optimum process parameters were carried out in accordance with a five-level rotatable central composite design.,The porosity results showed very low values of <1 per cent, whereas mechanical properties were close to the values reported for the reference wrought AZ31 alloy in hot-rolled state. A fine-grained microstructure was observed with a large range of grain size, which enhanced the material’s mechanical properties. Corrosion characteristics of the SLM-manufactured material exceed those determined for the wrought material.,The results presented in this paper drive interest in magnesium alloys used in additive manufacturing processes. Low porosity, good mechanical properties, form of the microstructure and, most importantly, improved corrosion characteristics suggest that SLM provides great potential for the manufacture of ultralight structures, including resorbable metallic implants.