Tests of prototype SSC magnets
1988
Results are presented from tests of the third full-scale development dipole magnet for the Superconducting Super Collider (SSC) and from a retest of a 4.5-m model magnet of the same design mounted in an SSC cryostat. The 4.5-m magnet showed consistent quench performance between its original tests in boiling liquid helium in a vertical dewar and the current tests in forced-flow helium in a horizontal cryostat. Little or no retraining was observed over several thermal cycles. The full-length magnet required 12 quenches to train to its short-sample limit of 6800 A and displayed a reasonably stable quench plateau following training. Data are presented on quench behavior as a function of current and temperature, and on azimuthal and longitudinal loading of the coil by the support structure. >
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
6
References
10
Citations
NaN
KQI