Effect of the thickness of Sr2Bi4Ti5O18 transition layer on the properties of BiFeO3/Sr2Bi4Ti5O18 bilayer composite thin films

Abstract BiFeO3(BFO)/Sr2Bi4Ti5O18(SBT) bilayer composite thin films were prepared using the sol-gel method. The influence of the SBT transition layer thickness on the properties of BFO/SBT bilayer composite thin films was studied. The results showed that an SBT transition layer with the proper thickness can improve the BFO/SBT bilayer composite film performance. X-ray diffraction (XRD) analysis revealed that a bismuth layered perovskite structure is formed in all of the thin films. The scanning electron microscopy (SEM) result showed that the BFO/80 nmSBT sample exhibits good crystallization, an improved density and a uniform minimum grain size compared with the other samples. The X-ray photoelectron spectroscopy (XPS) result showed that the Fe2+ content and oxygen vacancy concentration are lowest in the BFO/80 nm SBT sample. This sample has good ferroelectric properties: the leakage current density has the lowest value of J = 5.21 × 10-5 A/cm2 among the samples at 350 kV/cm, 2Ec = 900 kV/cm, and 2Pr = 151 μC/cm2. At a low electric field (E 100 kV/cm). The relative dielectric constant (er) is 121, the dielectric loss (tanδ) is 0.024 at 105 Hz.