A thermal ink-jet printing approach for evaluating susceptibility of bacteria to antibiotics

Abstract An inexpensive method for determining minimum inhibitory concentrations (MIC) using ink-jet printing to deposit drug solutions and bacterial suspensions onto agar was developed. Substrate concentrations were varied using a “Y-value”, whereby a series of rectangles with the same width and colour but different heights were printed within a fixed unit area. Prior to MIC determination, the printer cartridges used were calibrated using Fast Green dye. The impact of thermal ink-jet printing on bacterial viability was assessed by colony counting and found not to be deleterious. MIC determinations were conducted by printing varying concentrations of the antibiotics onto agar-coated glass slides then printing a thin even film of a known bacterial density of Lactobacillus acidophilus. Broth microdilution was performed simultaneously to validate the results. Slides and well plates were then incubated anaerobically for 48 h. The MIC values obtained for the antibiotics used were within a permissible range for comparison.