Novel nanocomposite of biochar-zerovalent copper for lead adsorption.

In this study, a composite of zerovalent copper-biochar was investigated for its ability to remove lead from water. The prepared material was characterized by using scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffractomter (XRD), and X-ray photoelectron spectroscopy (XPS). The pH effect on adsorption of lead was investigated within the range of 2-8 and the effect of temperature was studied at 303, 308, 313, and 318 K. The kinetics of lead adsorption on biochar composite was evaluated and the equilibrium time of 12 hr was established. To further evaluate the nature of adsorption, Langmuir model was tested and the adsorption capacities were evaluated for lead adsorption on the surface of copper biochar composite. The activation energy, entropy, and enthalpy values indicated the adsorption phenomenon to be chemisorptive and spontaneous in nature. Comparison of adsorption capacities with the reported adsorbents in the literature concluded zerovalent copper-biochar composite to be an efficient adsorbent for the removal of lead in the experimental conditions under study. RESEARCH HIGHLIGHTS: Highly efficient composite of zerovalent copper with biochar was synthesized for lead adsorption. XPS and XRD shows the presence of zerovalent copper in the biochar composite. pH and temperature were the main governing factors in the adsorption process. Adsorption capacity for lead is higher than many of the reported adsorbents.