Identification of polycyclic aromatic hydrocarbons in carbon black with reference to cancerogenic risk in tire production.

Carbn blacks used in tire production have been examined for their polycyclic aromatic hydrocarbons (PAH) content. The analytical procedures commonly adopted are discussed. The results obtained show that a benzene extraction time of 250 hours is necessary to obtain complete extraction, but for practical purposes, an extraction time of 150 hours is sufficient to extract more than 95% of the PAH. It is possible to identify two classes of blacks in regard to extractables. The one class provides extractables in the range of 200 to 400 micrograms/g; the second class, in the range of 1000 to 2000micrograms/g. No PAH was detected by direct injection of carbon black into the mass spectrograph at 200 degrees C, 10(-6) torr. This was probably due to the very strong bonding to the black particles. The PAH contribute a relative constant percentage of the benzene extracts. It is reasonably possible to exclude any carcinogenic risk to personnel, in a working environment, with an airborne carbon black concentration equal to or less than 3.5 mg/m3, due to the very low PAH content of carbon black and to the very strong PAH bonding to the black particles.