Characterization of composite materials based on LDPE loaded with agricultural tunisian waste

This study investigated the use of an available agricultural Tunisian vine stem waste as a filler material. Composites of green materials were prepared using vine stems as filler and low density polyethylene (LDPE) as a matrix. A series of composite films was prepared by different loadings of the vine stem waste with 10–50% of the filler in 10% intervals. The ensuing materials were characterized by several techniques. The morphology of the composites was investigated using scanning electron microscopy (SEM). The thermal and mechanical properties were studied using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA), respectively. The results indicated that vine-stem based particles enhanced the thermo-mechanical properties of the thermoplastic matrix and demonstrated that this available lignocellulosic biomass of vine stems can be considered to be a promising filler material. However, the obtained result of water absorption indicated that the maximum limit of the filler content should not exceed 30% of vine stems. POLYM. COMPOS., 36:817–824, 2015. © 2014 Society of Plastics Engineers