Development of laser deposited multilayer zone plate structures for soft X-ray radiation

Abstract As a novel approach, the combination of pulsed laser deposition and focused ion beam was applied to fabricate different types of multilayer zone plate structures for soft X-ray applications. For this purpose, high quality non-periodic ZrO 2 /Ti multilayers were deposited by pulsed laser deposition on planar Si substrates and on rotating steel wires with layer thicknesses according to the Fresnel zone plate law. Linear focusing optics were fabricated by cutting slices out of the multilayers by focused ion beam and placing them directly over pinholes within Si 3 N 4 substrates. Additionally, it was shown that laser deposition of depth-graded multilayers on a wire is also a promising way for building up multilayer zone plates with point focus. First experiments using a table-top X-ray source based on a laser-induced plasma show that the determined focal length and spatial resolution of the fabricated multilayer Laue lens corresponds to the designed optic.