Durability of the Reinforced One-Part Alkali-Activated Slag Mortars with Different Fibers

This paper investigates the effects of reinforcing one-part alkali-activated slag binders (OAASs) with different types of fiber (steel, polyvinyl alcohol [PVA], basalt, and cellulose) and fiber combinations (single and hybrid) on the mechanical and durability properties of OAASs. All OAASs were reinforced by a 1% fiber volume fraction. Compressive and flexural strengths were the mechanical properties, which were addressed. The durability of the reinforced OAASs was examined based on water absorption by immersion and capillary, acid resistance, high temperature resistance, carbonation resistance, and freeze/thaw resistance. The experimental results showed that the fiber type and combination greatly affects the mechanical and durability properties of OAASs. Moreover, the influence of fiber type and combination on high temperature resistance and freeze/thaw resistance is greater than the influence on acid resistance and carbonation resistance.