Design of a new P-NBI control system for 100-s injection in JT-60SA

Abstract Modification of JT-60U to a superconducting device (so-called JT-60SA) has been planned to contribute to ITER and DEMO. The positive-ion-based NBI system (P-NBI) is required to inject 24 MW for 100 s with 12 units. The P-NBI control system is to be fully remodeled with PLC (Programmable Logic Controller), which is featured by high market availability, system extensibility, cost-effectiveness, and independent development in programming. One of the critical issues to apply the PLC to the P-NBI control system is to control quickly the high voltage power supplies within 200 μs. For this purpose, the fastest PLC dealing with 4 refresh words at the processing time of 200 μs is to be employed. The second issue is to construct a data acquisition system for such a large number of data channels (∼2300 digital and ∼1300 analog data channels). The use of PLC linked with PC-based data measurement devices via Ethernet allows processing the large number of channels. The third issue is to make the man–machine interface simple. The marketed software giving an easy product of graphic menus is available for PLC programming. From these results, it is expected that commercial PLC could be applied to the large-scale control system of the P-NBI system for 100 s operations.