Hybrid-pair ratio adjustable power splitters for add-on RF shimming and array-compressed parallel transmission.

PURPOSE A ratio adjustable power splitter (RAPS) circuit was recently proposed for add-on RF shimming and array-compressed parallel transmission. Here we propose a new RAPS circuit design based on off-the-shelf components for improved performance and manufacturability. THEORY AND METHODS The original RAPS used a pair of home-built Wilkinson splitter and hybrid coupler connected by a pair of connectorized coaxial cables. Here we propose a new hybrid-pair RAPS (or HP-RAPS) circuit that replaces the home-built circuits with two commercially available hybrid couplers and replaces connectorized cables with interchangeable microstrip lines. We derive the relation between the desired splitting ratio and the required phase shifts for HP-RAPS and investigate how to generate arbitrary splitting ratios using paired meandering and straight lines. Several HP-RAPSs with different splitting ratios were fabricated and tested on the workbench and MRI experiments. RESULTS The splitting ratio of an HP-RAPS circuit has a tan or cot dependence on the meandering line's additional length compared to the straight line. The fabricated HP-RAPSs exhibit accurate splitting ratios as expected (<4% deviations) and generate transmit fields that well agree with predicted fields. They also demonstrated a low insertion loss of 0.33 dB, high output isolation of -26 dB, and acceptable impedance matching of -16 dB. CONCLUSION A novel HP-RAPS circuit was developed and implemented. It is easy-to-fabricate/reproduce with minimal expertise. It also preserves the features of the original RAPS circuit (ratio-adjustable, small footprint, etc.) with lower insertion loss.