High Performance of IZO Coated on PET Substrate for Electroluminescence Device Using Oxygen Plasma Treatment

Thin films of indium zinc oxide (IZO) were deposited on polyethylene terephthalate (PET) substrate with varying plasma power (from 100 W to 300 W) using the radio-frequency (RF) magnetron sputtering technique and electroluminescence (EL) devices. The IZO films that were obtained from this process were treated with oxygen plasma powers using the plasma-enhanced chemical vapor deposition (PECVD) system. After this treatment, the microstructural, electrical, and optical properties of IZO films were observed and reported. The result showed that the IZO/PET films was fabricated at the lowest resistivity ( ), while the optical characterization displayed the maximum transmittance of 95% in the visible region with a smooth morphology and good crystalline structured, affected by the 300 W of plasma power with the optimum carrier concentration ( ) and hall mobility (42.12 cm2/V·sec), respectively. The luminance properties and the EL efficiency were also investigated and shown a 300 W highest point of plasma power with 84 cd/m2 and 0.924 lm/W. The film properties were found responsible for producing and improving the performance of IZO/PET substrate, suitable for displaying the devices.