Gas sensing applications of the inverse spinel zinc tin oxide

Abstract In this work, we prepared zinc stannate (ZTO) thin films by RF sputtering starting from a sintered ceramic target with Zn:Sn ratio 2:1, by varying the argon/oxygen pressures during the deposition process. Thin films were deposited on alumina substrates at 400 °C, and subsequently annealed at 600 °C in the air. The transparency typical for the as-deposited films was preserved even after their annealing at 600 °C in the air, where the high temperature was crucial for the improvement of the crystalline Zn 2 SnO 4 , ZTO phase, as confirmed by Raman measurements. Additionally, the post-deposition thermal treatment resulted in porous ZTO films suitable for gas sensing application. The structural and surface morphological properties of thin films were investigated by Raman spectroscopy, field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray analysis (EDX). Finally, the gas sensing properties towards nitrogen dioxide, ethanol and acetone have been tested, showing the high potentiality of this material as the gas sensor for ethanol and acetone at 400 °C, and nitrogen dioxide at 200 °C.