Residual stress evaluation of adhesively bonded composite using central cut plies specimens

ABSTRACTThe present study reports on the evaluation of residual stress field formation and distribution in Central Cut Plies (CCP) specimens. Real-time measurements were performed using a distributed sensing fiber optic system based on Rayleigh Backscattering, which was successfully able to capture strain distribution inside the adhesive layer at every 0.65 mm during the entire curing cycle, for both unidirectional and cross ply laminate configurations. A finite element analysis was also performed to cross-correlate with the experimental residual strain distributions in the proximity of the severed central cut plies. The results outlined in this study demonstrate the presences of tensile residual stresses within the adhesive layer for both configurations. A full field strain distribution and the significance of these findings in relation to the use of the CCP test for fracture mechanics testing will be discussed. Results of this study have shown that residual stresses arise after the curing process for wh...