Development of an x-ray detector by polycrystalline diamond and its application in Z-pinch x-ray detection
2020
: Large-grain-sized polycrystalline diamond films are fabricated by electron assisted chemical vapor deposition. A pure SP3 carbon bond in the cubic lattice structure is confirmed by Raman spectrum analysis. The grain size is on the order of several hundreds of μm or larger. Interlaced-finger electrodes are imprinted onto a 6 × 6 mm2 × 500 µm film to fabricate the x-ray detector. The width of every finger is 25 µm, and the distance between nearby fingers is 25 μm. Strong x ray irradiates when a pulsed current flows through a double-layer nested tungsten wire array in the Z-pinch. This diamond detector now works as one of the main x-ray detectors for the Z-pinch device. The diamond detector is calibrated using a plastic scintillator. The comparison between the signal measured by these two methods confirms that the large-grain-sized polycrystalline diamond is a good candidate for the detection of nanosecond pulsed x ray.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
26
References
0
Citations
NaN
KQI