Development and operating experience of a 1.1-m-long superconducting undulator at the Advanced Photon Source

Development of superconducting undulators continues at the Advanced Photon Source (APS). Two years after successful installation and commissioning of the first relatively short superconducting undulator ``SCU0'' in Sector 6 of the APS storage ring, the second 1.1-m-long superconducting undulator ``SCU1'' was installed in Sector 1 of the APS. The device has been in user operation since its commissioning in May 2015. This paper describes the magnetic and cryogenic design of the SCU1 together with the results of stand-alone cold tests. The SCU1's magnetic and cryogenic performance as well as its operating experience in the APS storage ring are also presented.