Instrumental neutron activation analysis of Moroccan geological samples using the k0-standardization method

Instrumental neutron activation analysis (INAA) for traces and major elements of several geological samples from “Zgounder” region in Morocco was performed utilizing the k 0-standardization method. Sample irradiation has been done by the 250 kW Triga Mark II reactor at Jozef Stefan Institute in Slovenia. Due to its accuracy, sensitivity and specificity, the k 0-standardization method is the most suitable method for non-destructive multielement analysis mainly for trace elements in rocks. It requires an accurate knowledge of the parameters of the irradiation facilities and other instrumentation parameters. It is an absolute standardization method, where the absolute nuclear data are replaced by a nuclear constant, the k 0-factor, determined experimentally with high accuracy. More than 40 elements were determined using about 30-second short and about 7-hour long irradiations. Gamma-rays emitted from the irradiated samples have been determined by a high purity germanium detector. Accuracy was assessed using the standard reference material AGV-1. This was less than 1% for major elements and about 5% for traces.