Mileura RFI Model for All-sky EOR Experiment

I extracted a simple model of RFI at Mileura between 50 MHz and 250 MHz from a report made for the LOFAR/SKA site selection processes [Chippendale, 2003]. Fig. 1 shows a plot of the resulting table of model interferers. It represents the expected dB ratio of RFI power to ambient power at the antenna terminals for an all-sky EOR experiment with a low gain antenna (~7 dBi or 40 . 0 2 = λ e A ). Each point should be accurate to approximately dB 5 ± given the assumptions made in this report.