Comparison of methods for sodium and potassium determination in llama urine.

OBJECTIVE: To compare results for sodium and potassium determination on llama urine, using flame emission spectrophotometry (flame photometry), atomic absorption spectrophotometry (AAS), indirect ion-selective electrode potentiometry (ISE), and direct ISE. DESIGN: Llama urine samples encompassing a wide range of electrolyte concentrations were analyzed for sodium and potassium concentrations, using 4 analytical methods, and results were compared statistically to assess correlation, bias, and potential interferents. SAMPLE POPULATION: 10 healthy male llamas. PROCEDURE: Urine specimens were obtained from llamas fitted with urine collection apparatus at defined intervals over a 24-hour period. Urine samples were centrifuged, and supernatants were frozen at -70 C until analysis. Analytical procedures were done, using standard laboratory protocols. Means, correlation coefficients, and bias were calculated, and differences were evaluated by ANOVA, with significance set at P 0.9) for potassium values. Data did not suggest presence of a potassium chelator in llama urine; urine potassium values measured by indirect ISE were significantly higher (by 150 to 200 mmol/L) than those measured by other methods. CLINICAL RELEVANCE: Urine electrolyte analysis in llamas resulted in less agreement between methods than is generally found for serum. Data collection for patient monitoring or research analysis should be restricted to a single method to avoid differences in results attributable to analytical variance.