Characterization of Flash X-Ray Source From a Marx-Based Pulse Power System
2021
The source characterization of a Flash X-ray (FXR) device is essential in defining its utility for dynamic radiography. A Marx generator [550 kV, $50~\Omega $ , and 45 ns full-width half-maxima (FWHM)] based FXR source operating in the voltage range 200–550 kV has been characterized. The FXR electron beam diode has a cylindrical geometry with stainless steel (SS) knife-edge cathode and tapered tip Tungsten rod as anode. The FXR source is connected to the Marx generator-based pulsed power system using a flexible high-voltage cable feed through. The hard X-ray spectrum was measured using a differential absorption spectrometer (DAS). The FWHM of the spot size of FXR source was measured using a pinhole camera and was estimated to lie between 1.83 and 2.31 mm. The on-axis dose measured at 1 m matches well with the calculated dose $D \alpha V^{2.2}I\Delta t$ , where $V$ is the applied voltage and $I$ is the current, and $\Delta t$ the time duration.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
14
References
0
Citations
NaN
KQI