Damage evolution and spall failure in copper under complex shockwave loading conditions

2020 
The damage evolution and spall behavior of copper under complex shockwave loading conditions were investigated using plate impact experiments with conical targets. Sweeping tensile waves were generated by the interaction of the released waves that were reflected from the free surfaces of the impactor and the cone surface. From the free-surface velocity profiles measured by multi-channel velocimetry, the classic pull-back spall signals were observed in incipient and complete spallation experiments. The spall strength estimated from the pull-back velocity strongly depended on the loading path and the loading wave profile. Post-experiment analysis based on the soft-recovery technique revealed that the damage distributions were very different from the bottom to the top of the conical target, but the corresponding free-surface velocity data measured at different locations suggested that similar responses occurred, which indicated that the spall strength was the critical threshold stress of micro-void nucleation or early growth. The fractography analysis of the fracture surfaces showed that metal micro-spheres were scattered in deep dimples, which indicated that the increase in temperature due to local severe plastic deformation around the voids was important. With the same set of model parameters, the plate impact spallation experiments with plane and conical targets were simulated using a critical damage evolution model. A good agreement was obtained between the simulations and experiments, which demonstrated the model capabilities for predicting the spall responses of metals under complex shockwave loading.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    45
    References
    1
    Citations
    NaN
    KQI
    []