Optical Design and Manufacturing of Fresnel Lenses for The First Korean High Concentration Solar PV System

In this study, we designed and optimized flat Fresnel lens and the light pipe to develop 500X concentrated solar PV system. In the process, we compare the transmission efficiencies according to groove types. We performed rigorous ray tracing simulation of the flat Fresnel lenses. The computer aided simulation showed the ‘grooves in’ case has the better efficiency than that of ‘grooves out’ case. Based on the ray‐trace results, we designed and manufactured sample Fresnel lenses. The optical performance were measured and compared with ray‐trace results. Finally, the optical efficiency was measured to be above 75%. All the design and manufacturing were performed based on that InGaP/InGaAs/Ge triple junction solar cell is used to convert the photon energy to electrical power. Field test will be made and analyzed in the near future.