Characterization, kinetic, thermodynamic and isotherm data for diclofenac removal from aqueous solution by activated carbon derived from pine tree.

Abstract The usage of low cost material as adsorbent would be admirable from environmental point of view. Thus, herein, this data set present a simple method for providing an adsorbent from activated carbon derived from pine tree. The prepared adsorbent was applied to remove diclofenac from aqueous solution. The characterization data of the adsorbent was analyzed using FTIR method. The FTIR test results showed that adsorbent has a functional group that is useful in adsorption process. It was conducted in laboratory scale and the adsorption technique was batch technique. The information regarding isotherms of diclofenac adsorption were listed. The Langmuir isotherm was suitable for correlation of equilibrium data with correlation coefficient value of 0.999. Adsorption of diclofenac by adsorbent from activated carbon follows pseudo second order model with correlation coefficient value ( R 2 ) of 0.9997. The data implied that the maximum adsorption capacity of adsorbent to uptake diclofenac from aqueous solution was obtained 54.67 mg/g. The acquired data indicated that the adsorption of diclofenac by the adsorbent prepared from activated carbon derived from pine tree is a promising technique for treating diclofenac bearing wastewaters.