Low Power Respiration Monitoring using Wearable 3D knitted Helical Coils.

We demonstrate a novel low power inductive wearable plethysmography system. This consists of ultra-sensitive 3D knitted helical coils integrated in a garment and an oscillator circuit with high quality factor. The low power oscillator is built using two cross coupled FET pairs with low capacitance drawing only 95 μA during operation and with a response time smaller than 10 μs. The sensor system is linear, with negligible hysteresis. The best compromise in sensitivity and power consumption is obtained with a 3D knitted helical coil using jersey knit with elastic yarn, a lower knitting needle size than recommended for the yarn and minimizing both the number of stitches per winding as well as the stitches containing metal. A sensitivity of 2.7 kHz per mm change in circumference with a power consumption of 6.85 mW per 30 ms measurement time is reported. This system can be used for long term breathing monitoring using a garment indistinguishable from everyday clothing.