Development of a new analytic method for miter bend polarizer on ECW transmission line

Abstract For successful tokamak operation with adequate mode selection of the electron cyclotron wave, launching wave polarization should be accurately controlled. In this study, a new method is proposed to efficiently identify the response of polarizers using a geometric approach in the Stokes space, focusing on the fact that polarization can be represented as a vector in Stokes space and the response of a polarizer can be described as a rotation. The proposed methods are intended (i) to determine the response parameters of a polarizer or (ii) to determine the response parameters of two polarizers simultaneously. A simple measurement system was prepared to observe the polarizers’ output polarization in the 110/138 GHz transmission line. The determined response parameters of two polarizers can reproduce measured polarizations with sufficient accuracy above 99%. The direction of an output polarization circularity, the only feature of a polarization that could not be directly known from the prepared measurement, could also be determined with sufficient accuracy.