Microstructures and Oxidation Behavior According to Nb:Mo ratio in a Nb–Mo–Si System with Si Pack Cementation Coatings

Research is being conducted on Mo- and Nb-based alloys that are used in the aerospace sector, including those used for advanced gas turbines and aircraft engines. There is a limit to using Mo, which has a high density among refractory metals, and a few studies exist describing the addition of Nb to Mo–silicide alloys. There is a lack of guidance research on the basic Nb:Mo ratio of alloys, and it is necessary to study how to improve oxidation resistance. Therefore, this study aims to improve oxidation resistance by controlling the ratio of Nb and Mo in (Nbx, Moy)Si2 coating layers with Si pack cementation coatings on Nb–Mo alloys. Static oxidation tests were carried out at 1200 °C for 6 h to confirm the oxidation characteristics. As a result, a SiO2 or SiO2 + Nb2O5 ceramic protective layer was formed on the surface. After the oxidation tests, alloys with a Nb content of less than 35 at.% were found to protect the surface. The ratios of Nb and Mo in the Nb–Mo alloy and silicide coating layer were compared, and the improvement of oxidation resistance is discussed in terms of microstructural evolution.