Dynamic Mechanical Properties of Ti–Al3Ti–Al Laminated Composites: Experimental and Numerical Investigation

The Ti–Al3Ti–Al laminated composites with different Al contents were prepared by vacuum hot pressing sintering technology. The effects of Al content on the dynamic mechanical properties of the composites were studied using the combination of Split Hopkinson Pressure Bar experiment and finite element analysis. The results showed that different Al content changes the fracture mode of the composites. The laminated composites without Al have higher brittleness and lower fracture strain. The Ti–Al3Ti–Al laminated composites containing 10–15%Al have better dynamic mechanical properties than those without Al, but the subsequent increase of Al content is not conducive to the improvement of strength. However, when the Al content in the specimen reaches 30%, the dynamic mechanical properties of the composites decrease, multi-crack phenomenon and relatively large strain occur, and the Al extruded from the layers fills the crack.