Atomic scale mechanics explored by in situ transmission electron microscopy with a quartz length-extension resonator as a force sensor

An in situ transmission electron microscopy (TEM) holder equipped with a quartz length-extension resonator (LER) as a force sensor was developed to examine the elastic properties of atomic-scale materials. This holder is a useful means of studying the effects of size and crystal orientation on the properties of nanomaterials via measurements of mechanical responses while simultaneously observing atomic structures. The spring constants of nanocontacts (NCs) were determined based on shifts in the resonance frequency of the LER during TEM observations. The LER spring constant and sensitivity (the ratio of the LER induced charge to its oscillation amplitude), both of which are crucial to mechanical evaluation of NCs, were precisely calibrated from an analysis of TEM images along with the output of the electronics attached to the holder. The mechanical stability of the newly developed TEM holder was sufficient to allow chains of Pt atoms in the NC to be maintained for at least several seconds. The minimum measurable NC spring constant was on the order of 1 N m(-1), comparable to that associated with a single atomic bond. The spring constant of a NC composed of a single-bonded chain of two Pt atoms was found to be 13.2 N m(-1). This holder therefore has significant potential with regard to the characterization of nanoscale mechanical properties.