Anode biofilm influence on the toxic response of microbial fuel cells under different operating conditions.

Abstract The response of microorganisms in microbial fuel cells (MFCs) to toxic compounds under different operating conditions, such as flow rate and culture time, was investigated herein. While it has been reported that MFCs can detect some toxic substances, it is unclear if operating conditions affect MFCs toxicity response. In this study, the toxic response time of MFCs decreased when the flow rate increased from 0.5 mL/min to 2 mL/min and then increased with 5 mL/min. The inhibition rates at 0.5 mL/min, 2 mL/min, and 5 mL/min were 8.4% ± 1.6%, 45.1% ± 5.3%, and 4.9% ± 0.3%, respectively. With the increase of culture time from 7 days to 90 days, the toxic response time of MFCs gradually increased. The inhibition rates at culture times of 7 days, 45 days, and 90 days were 45.1% ± 5.3%, 32.6% ± 6.6%, and 23.2% ± 1.3%, respectively. Increasing the culture time will reduce the sensitivity of MFC. The results showed that MFCs can respond quickly at a flow rate of 2 mL/min after cultivation for 7 days. Under these conditions, the power density can reach 1137.0 ± 65.5 mW/m2, the relative content of Geobacter sp. is 57%, and the ORP of the multilayers changed from −159.2 ± 1.6 mV to −269.9 ± 1.7 mV within 200 μm biofilm thickness. These findings show that increasing the flow rate and shortening the culture time are conducive for the toxicity response of MFCs, which will increase the sensitivity of MFCs in practical applications.