Some physical parameters of micrometeoroids
2011
Detailed morphological parameters (depth/diameter ratio, circularity index) of microcraters in the 0.2 to 100 micron diameter range were obtained via SEM techniques for three lunar glass surfaces. The depth/diameter ratios are typically 0.5 to 0.8 with a range of 0.3 to 1.3. The circularity index varies from 0.4 to 1.0 with a pronounced maximum at 0.7 to 0.9. These parameters are compared with microcraters produced in the laboratory via electrostatic particle accelerators. The following conclusions are drawn: The great majority of observed crater depths are compatible with micrometeoroid densities of 2 to 4 g/cu cm; crater depths are incompatible for projectile densities less than 1 g/cu cm and greater than 7 g/cu cm. The circularity index of microcrater pits indicates rather equidimensional, if not spherical, projectiles. Needles, platelets and other highly irregular shapes can be excluded. Less than 5% of all craters observed may offer different conclusions.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
20
Citations
NaN
KQI