Large-scale surface modification to improve hydrophilicity through using a plasma brush operated at one atmospheric pressure

A uniform plume with pulsed discharges is generated through using a plasma brush excited by a direct current power supply. The results indicate that the plume length increases with the increasing gas flow rate or dissipated power. The optical emission spectrum from the plasma brush reveals that active species are abundant in the plasma plume. Based on the spectrum, an electron density on the order of 1014 cm−3 is obtained, which increases with the increasing dissipated power and gas flow rate. After a single scan of the plasma brush on the polyethylene terephthalate surface, a uniform surface modification is achieved with an improved hydrophilic width of about 24 mm. The water contact angle of the surface decreases with the decreasing scanning velocity and nozzle-sample distance or the increasing dissipated power and gas flow rate. Moreover, the treated surface shows an aging behavior in 6 days. Raman spectra indicate that oxygen-containing polar groups are generated on the treated polyethylene terephthal...